AQUABAG-PURE Water Polishing Bag - Large
$46.99
- Removes Silt, Pollen*, Bacteria, Algae, Sand, DE Power and More
- Improves Filter Performance Up To 30 Times
- Absorbs Tanning Oils and Lotions
- Works With Your Existing Filter System
- Filters particles as small as 1 Micron (1/1000th of a mm)
- Reusable and Durable
- No Tools Needed To Install
- Microfilter when closing and opening for an easier spring
- Easy Adapters For Most Pools - SEE ADAPTERS
The Aquabag-PURE is the chemical free way to sparkling pool water!
Particles are the number one cause of cloudy pool water. Silt, Pollen, algae, bacteria, spores, cysts and other microscopic material will be permanently removed from your pool, helping to provide the clearest and healthiest swimming environment possible. An added benefit of removing these types of contaminants is that it can reduce your chemical usage for long term savings.
If your pool is cloudy due to fine contaminants that are passing through your pool filter, our Aquabag-PURE filter will collect it and restore your pool water to crystal clear condition. As an added bonus, it will also absorb sun tanning oils and lotions.
Connects in minutes, without tools! Simply connect the bag to the water return port using one of our adapters or the hose from your filter system (above ground only). Our VariNeck™ design allows connections to either 1.5" or 2" fitting or hose connections without a size adapter. For 2" fittings, simply use scissors to remove the 1.5 inch section of the bag neck.
All Aquabags work with in ground pools as well as above ground pools, including soft sided pools! The most common connection for hard wall and soft sided pools where none of our adapters are compatible is to simply disconnect your return hose, insert it into the Aquabag-PURE, tighten the supplied clamp and put the bag in the pool. Then simply sit back while your pool clears.
Settled Debris and Silt
If you have debris settling in your pool that simply passes through your main filter, just connect the Aquabag-PURE to your filter return and vacuum as normal. It will capture all of it.
*Pollen
Effectiveness on extreme pollen and/or heavy pollen sediment may be limited.
Algae
Please read about Algae removal in our FAQ
Customer Reviews
Based on 53 reviews
72%
(38)
15%
(8)
6%
(3)
2%
(1)
6%
(3)
F
The bag works great to catch small debris that gets through the pleated filters. It would be nice if the end of the bag opened to clean the bag easier.
R
The product seems to do exactly what it says. It does. Water after 2 days was crystal clear and there was nothing detectable inside the bag. Although I didn't clean it out yet, I suspect the directions will work fine, even though it may be a bit inconvenient to do. The one unexpected feature is that the bag stops the circulation flow in my pool. The bag basically causes all of the water to go through a diffused process and does not allow the circulation to continue as with the eyeball nozzle. I guess I just wasn't thinking about that feature so I mention it here. I bought two because I was suspecting I would need to clean them more often, but in retrospect it looks like I have an extra bag that I probably won't use for a while.
D
Amazing how well it worked. Collected all the super fine debris that made it through the sand filter and cleared up the water super fast.
L
So pleased with the aquabag!! We have been fighting algae all season and used a $30 bottle of Terminator and pool still looked bad. Vacuumed and the algae just kept settling on the bottom of the pool. Hooked the aquabag onto the return with the adapter and vacuumed. Watched for the bag to look dirty and sprayed the bag off with the hose 4 or five times. Then left the bag on and by the next day our pool was clear! Can’t say enough good things about the aquabag! Don’t hesitate to buy one it is well worth the money!! See before and after pics!
G
I had a huge algae issue and used floculant. I brushed and vacuum but the water still was cloudy. This bag got it clear after 2 days. Had to clean in between ( the cleaning is a bit of a pain) . I used a hose with the nozzle on jet speed and then I soaked it in a chlorine/water mixture . That worked for me.